ADAST 507 small format, B3 (20 in), with big press features

Thirty years of experience in developing offset printing presses of B3 (15 x 20 1/2 in) format has established
a solid design foundation that has evolved into the ADAST 507 line of presses. ADAST 507 is available in
two-, four- and five-color configurations with perfecting capabilities. Automation Affordable is available on
all ADAST 507 models, including basic press functions such as Semi-automatic plate changer, blanket washer
and the quick-adjust Perfector. Total Register Control is standard with tri-axis register; radial, axial, and
diagonal / circumferential, lateral and skewing. Adacontrol Remote Inking Console is available with CIP3/4
compatibility.

Standard features of the ADAST 507 printing presses

• Vacuum feeder
• Register control including skewing (cocking) on the run
• Radial and axial motorized register control on the run
• Ink duct roller direct drive by separate motor
• Auto-Ink washer
• Inching by separate motor
• OMRON control system
• Single-system feeder head
• Plate cylinder with BACHER centering system and rear split clamping bar
• Remote control of registers and duct rollers from the delivery touch screen
• ADACONTROL central control CPC and Spectrophotometer
• Adacontrol Junior remote ink keys control
• High pile delivery
• GRAFIX Digital powder sprayer – only for high pile delivery
• INKDRY plus IR drying unit
• SIMCO ionization unit
• Delivery drum with SUPER BLUE sleeve
• NON – STOP delivery
• Press adaptation for waterless offset
  printing
• Remote communication

* Standard features and options may vary depending on the specific model. This list is for informational purpose only. Your ADAST Authorized Dealer will offer you exact specifications.

• ADAMATIC dampening system with
  dampening rollers without sleeves
• Unit for circulating and cooling the
  dampening solution
• Segmented ink keys
• Oscillating ink form rollers
• Low pile delivery
• Print counter with pre-selection
• GRAFIX Junior powder spray unit
• Pneumatic sheet decurler in the delivery
• Lubrication unit with automatic control

Optional extras of the ADAST 507 presses

• Semi-automatic plate changer Perfector
• Blanket washer (only for presses with high pile delivery)

General technical data

Maximum sheet size: 381 x 520 mm / 15 x 20 1/2 in
Minimum paper size:
Straight printing: 105 x 148 mm / 4 1/8 x 5 13/16 in
Perfecting: 230 x 148 mm / 9 1/6 x 5 13/16 in
Maximum print area: 370 x 515 mm / 14 9/16 x 20 1/4 in
Substrate:
Stock thickness range: 0.4 mm / 0.004 - 0.016 in
Specific weight: 40 – 350 g/m2
Maximum printing speed: 12 000 impressions/hour*
Minimum printing speed: 3 000 impressions/hour
Feeder pile height: 940 mm / 37 in
Low delivery pile height: 420 mm / 16 1/2 in
High delivery pile height: 880 mm / 34 9/16 in
Printing plate size:
for presses with semi-automatic plate changer (width x height x thickness): 521 x 440 x 0.15 mm / 20 1/2 x 17 5/16 x 0.006 in
for presses with quick clamping system (width x height x thickness): 521 x 415 x 0.15 mm / 20 1/2 x 16 5/16 x 0.006 in
Blanket size (width x height x thickness): 524 x 472 x 1.9 mm / 20 5/8 x 18 9/16 x 4 ply

Models:
ADAST 527 N (two-color press, low pile delivery)
ADAST 527 V (two-color press, high pile delivery)
ADAST 547 N (four-color press, low pile delivery)
ADAST 547 V (four-color press, high pile delivery)
ADAST 557 N (five-color press, low pile delivery)
ADAST 557 V (five-color press, high pile delivery)
Model Power (kVA)* Length (mm / in) Width (mm / in) Height (mm / in) Weight (kg / lbs)
ADAST 527 N 11.5 2 580 / 102 1 370 / 54 1 670 / 66 3 600 / 7.938
ADAST 527 V 11.5 3 950 / 156 1 370 / 54 1 670 / 66 4 450 / 9.812
ADAST 547 N 15.0 4 280 / 169 1 370 / 54 1 670 / 66 6 500 / 14.325
ADAST 547 V 15.0 5 640 / 222 1 370 / 54 1 670 / 66 7 300 / 16.096
ADAST 557 N 15.0 5 130 / 202 1 370 / 54 1 670 / 66 7 900 / 17.420
ADAST 557 V 15.0 6 490 / 256 1 370 / 54 1 670 / 66 8 700 / 19.184